手机:13781924618

新闻资讯
所在位置:主页 > 新闻资讯 >

雕刻机的主轴

更新时间:2018-01-19 点击数:

关于雕琢机而言,它的主轴是非常重要的,好的主轴可以让我们更好的进行雕琢加工,而不好的主轴则让我们在雕琢加工时费事不断。不过,雕琢机的主轴是有些不同的,那么,雕琢机主轴的不同之处是什么呢?下面,就让郑州雕琢机生产厂家给你介绍一下吧。

1、水冷主轴电机望文生义就是选用水循环来冷却主轴高速旋转后产生的热量,这种方法作用会很好,由于通过流转之后的温度不会超过40度。风冷主轴电机选用的是风扇方法来散热,它的运用作用肯守时不如水冷的。

2、在噪音方面,水冷主轴电机基本上没有噪音,可是风冷的主轴电机则很响。然而在运用寿命方面,由于水冷主轴电机要注意保养、勤换水或许选用工业水冷却机,所以它的运用寿命要比风冷主轴电机要长很多。

3、在精度精度方面,水冷主轴电机轴向、径向跳动基本上都是在0.003毫米以下,这是风冷主轴电机远远不及的,这也是不同的所在。

通过郑州雕琢机生产厂家的介绍,相信你现已知道雕琢机主轴的不同之处是什么了。

As for carving machine, its spindle is very important. Good spindle can make us better carve and process, but bad spindle will make us constantly struggling in carving. However, the spindle of the carving machine is somewhat different. So what's the difference between the main axes of the carving machine? Let's introduce the Zhengzhou carving machine manufacturer to you.

1, a water-cooled motor is to use water circulation to cool after the heat generated spindlerotating speed, this method will be very good, because the temperature will not exceed 40 degrees after the transfer of the. The air-cooled spindle motor is selected by the fan method to heat the heat, and its application is not as good as water cold.

2, in the noise, water cooled spindle motor basically no noise, but the air-cooled spindle motor is very loud. However, in terms of service life, due to the attention of water cooled spindle motor, frequent water change or industrial water cooling machine, its service life is much longer than that of air-cooled spindle motor.

3, in terms of accuracy and accuracy, the axial and radial runout of the water cooled spindle motor is basically below 0.003 mm, which is far less than that of the spindle motor, which is also different.

Through the introduction of the Zhengzhou carving machine manufacturer, I believe you now know what the difference between the spindle of the carving machine is.

上一篇: 雕刻机的详细分类

下一篇: 雕刻机日常如何保养