Woodworking engraving machine is one of the more commonly used carving machine, widely used in carving wood products, the following fine grinding CNC Xiaobian, for you briefly introduced woodworking engraving machine positioning.
Positioning must start from the data fixed, the fixed here is not to say that the data with a splint fastened on the finished, the data must be positive. The use of wood engraving machine we can accurately find the data in it, on the spindle clamping a sword, then the tool fell on the table along the side of the data run, using data of an edge tool and direct gap to find a positive data. The data will be fixed in the future. And then proceed to the next work, determine the origin of the workpiece workpiece data.
The direction of the X and the direction of the Y are the same way, and here we just say the X direction. After fine-tuning will gradually close to the tool data on the left, gently rolling cutter, until the tool just exposed to the information, and then X left at the moment and then cleared the workpiece, the tool will lift, move to the right, the same is the tool just exposed to the data is right at the moment, X workpiece coordinate down. Then the general orientation of this value is the center of the direction of the data X. The same is true in the Y direction. In this way, woodworking engraving machine X and Y direction of the center is settled down, it is equivalent to the origin of the workpiece.
The selection of wooden doors is mainly made of solid wood, especially the solid wood composite materials, which preserves the advantages of natural solid wood, and avoids the defects of easy deformation and cracking. Material selection is important, but in the manufacturing process, exquisite precision. The traditional manufacturing process has gradually been replaced by machinery manufacturing. Woodworking engraving machine as the new favorite of wooden door manufacturing now, has been more and more wooden door manufacturers favorite. First, as a mechanical equipment, it is higher than the artificial power, and the waste rate is very low. Woodworking engraving machine uses the structure of Longmen type, heavy steel structure of the bed, to ensure the stability of the whole machine. Rack drive, stable transmission, to ensure long-term high-speed operation without deformation, not trembling. In this way, we can ensure the accuracy and beauty of carving, and then greatly improve the power of wooden doors.
The traditional craft wooden door makes many time according to the artificial practice factor, the output is low, the cost is high. Now choose wood carving machine produced wooden doors, carved picture is more beautiful, and suitable for mass production.
With the rapid development of the real estate industry, people's demand for high-grade wooden doors gradually highlights. Woodworking engraving machine is a good way to deal with this problem. Choose a good woodworking engraving machine not only in the use of satisfactory, in the product manufacturing process is also excelsior. Chengdu Kexing according to the market development of woodworking engraving machine production is the best choose a variety of wood carving milling type. The machine has been put into the market for two years and has been well received by the consumers.